Volume 4, Number 2, 2007

Special Issue on Fault Diagnosis and Fault Tolerant Control (pp.109-194)

Display Method:
Regular Paper
Applied RCM2 Algorithms Based on Statistical Methods
Fausto Pedro Garcia Márquez, Diego J. Pedregal
2007, vol. 4, no. 2, pp. 109-116, doi: 10.1007/s11633-007-0109-1
The main purpose of this paper is to implement a system capable of detecting faults in railway point mechanisms. This is achieved by developing an algorithm that takes advantage of three empirical criteria simultaneously capable of detecting faults from records of measurements of force against time. The system is dynamic in several respects: the base reference data is computed using all the curves free from faults as they are encountered in the experimental data; the algorithm that uses the three criteria simultaneously may be applied in on-line situations as each new data point becomes available; and recursive algorithms are applied to filter noise from the raw data in an automatic way. Encouraging results are found in practice when the system is applied to a number of experiments carried out by an industrial sponsor.
Fault Detection under Fuzzy Model Uncertainty
Marek Kowal, Józef Korbicz
2007, vol. 4, no. 2, pp. 117-124, doi: 10.1007/s11633-007-0117-1
The paper tackles the problem of robust fault detection using Takagi-Sugeno fuzzy models. A model-based strategy is employed to generate residuals in order to make a decision about the state of the process. Unfortunately, such a method is corrupted by model uncertainty due to the fact that in real applications there exists a model-reality mismatch. In order to ensure reliable fault detection the adaptive threshold technique is used to deal with the mentioned problem. The paper focuses also on fuzzy model design procedure. The bounded-error approach is applied to generating the rules for the model using available measurements. The proposed approach is applied to fault detection in the DC laboratory engine.
Reliability and Feedback of Multiple Hop Wireless Networks
N. Eva Wu, Sudha Thavamani, Xiaohua Li
2007, vol. 4, no. 2, pp. 125-134, doi: 10.1007/s11633-007-0125-1
This paper analyzes fault-tolerance over the entire design life of a class of multiple-hop wireless networks, where cooperative transmission schemes are used. The networks are subject to both node failure and random channel fading. A node lifetime distribution is modeled with an increasing failure rate, where the node power consumption level enters the parameters of the distribution. A method for assessing both link and network reliabilities projected at the networks design life is developed. Link reliability is enhanced through use of redundant nodes. The number of redundant nodes is restricted by the cooperative transmission scheme used. The link reliability is then used to establish a re-transmission control policy that minimizes an expected cost involving power, bandwidth expenditures, and packet loss. The benefit and cost of feedback in network operations are examined. The results of a simulation study under specific node processing times are presented. The study quantifies the effect of loop closure frequency, acknowledgment deadline, and nodes storage capacity on the performance of the network in terms of network lifetime, packet loss rate, and false alarm rate. The study concludes that in a network where energy is severely constrained, feedback must be applied judiciously.
Intelligent Fault Diagnosis in Lead-zinc Smelting Process
Wei-Hua Gui, Chun-Hua Yang, Jing Teng
2007, vol. 4, no. 2, pp. 135-140, doi: 10.1007/s11633-007-0135-z
According to the fault characteristic of the imperial smelting process (ISP), a novel intelligent integrated fault diagnostic system is developed. In the system fuzzy neural networks are utilized to extract fault symptom and expert system is employed for effective fault diagnosis of the process. Furthermore, fuzzy abductive inference is introduced to diagnose multiple faults. Feasibility of the proposed system is demonstrated through a pilot plant case study.
Fault Diagnosis of Nonlinear Systems Using Structured Augmented State Models
Jochen Aβfalg, Frank Allgöwer
2007, vol. 4, no. 2, pp. 141-148, doi: 10.1007/s11633-007-0141-1
This paper presents an internal model approach for modeling and diagnostic functionality design for nonlinear systems operating subject to single- and multiple-faults. We therefore provide the framework of structured augmented state models. Fault characteristics are considered to be generated by dynamical exosystems that are switched via equality constraints to overcome the augmented state observability limiting the number of diagnosable faults. Based on the proposed model, the fault diagnosis problem is specified as an optimal hybrid augmented state estimation problem. Sub-optimal solutions are motivated and exemplified for the fault diagnosis of the well-known three-tank benchmark. As the considered class of fault diagnosis problems is large, the suggested approach is not only of theoretical interest but also of high practical relevance.
Sensor Fault Detection, Isolation and Reconstruction Using Nonlinear Principal Component Analysis
Mohamed-Faouzi Harkat, Salah Djelel, Noureddine Doghmane, Mohamed Benouaret
2007, vol. 4, no. 2, pp. 149-155, doi: 10.1007/s11633-007-0149-6
State reconstruction approach is very useful for sensor fault isolation, reconstruction of faulty measurement and the determination of the number of components retained in the principal components analysis (PCA) model. An extension of this approach based on a Nonlinear PCA (NLPCA) model is described in this paper. The NLPCA model is obtained using five layer neural network. A simulation example is given to show the performances of the proposed approach.
Design and Performance Evaluation of Residual Generators for the FDI of an Aircraft
Marcello Bonfè, Paolo Castaldi, Walter Geri, Silvio Simani
2007, vol. 4, no. 2, pp. 156-163, doi: 10.1007/s11633-007-0156-7
In this work, several procedures for the fault detection and isolation (FDI) on general aviation aircraft sensors are presented. In order to provide a comprehensive wide-spectrum treatment, both linear and nonlinear, model-based and data-driven methodologies are considered. The main contributions of the paper are related to the development of both FDI polynomial method (PM) and FDI scheme based on the nonLinear geometric approach (NLGA). As to the PM, the obtained results highlight a good trade-off between solution complexity and resulting performances. Moreover, the proposed PM is especially useful when robust solutions are required for minimising the effects of modelling errors and noise, while maximising fault sensitivity. As to the NLGA, the proposed work is the first development and robust application of the NLGA to an aircraft model in flight conditions characterised by tight-coupled longitudinal and lateral dynamics. In order to verify the robustness of the residual generators related to the previous FDI techniques, the simulation results adopt a typical aircraft reference trajectory embedding several steady-state flight conditions, such as straight flight phases and coordinated turns. Moreover, the simulations are performed in the presence of both measurement and modelling errors. Finally, extensive simulations are used for assessing the overall capabilities of the developed FDI schemes and a comparison with neural networks (NN) and unknown input Kalman filter (UIKF) diagnosis methods is performed.
Parity Relation Based Fault Estimation for Nonlinear Systems: An LMI Approach
Sing Kiong Nguang, Ping Zhang, Steven X. Ding
2007, vol. 4, no. 2, pp. 164-168, doi: 10.1007/s11633-007-0164-7
This paper proposes a parity relation based fault estimation for a class of nonlinear systems which can be modelled by Takagi-Sugeno (TS) fuzzy models. The design of a parity relation based residual generator is formulated in terms of a family of linear matrix inequalities (LMIs). A numerical example is provided to illustrate the effectiveness of the proposed design techniques.
Reliable Memory Feedback Design for a Class of Nonlinear Fuzzy Systems with Time-varying Delay
You-Qing Wang, Dong-Hua Zhou, Li-Heng Liu
2007, vol. 4, no. 2, pp. 169-176, doi: 10.1007/s11633-007-0169-2
This paper is concerned with the robust reliable memory controller design for a class of fuzzy uncertain systems with time-varying delay. The system under consideration is more general than those in other existent works. The controller, which is dependent on the magnitudes and derivative of the delay, is proposed in terms of linear matrix inequality (LMI). The closed-loop system is asymptotically stable for all admissible uncertainties as well as actuator faults. A numerical example is presented for illustration.
Robust Nonlinear Analytic Redundancy for Fault Detection and Isolation in Mobile Robot
Bibhrajit Halder, Nilanjan Sarkar
2007, vol. 4, no. 2, pp. 177-182, doi: 10.1007/s11633-007-0177-2
A robust nonlinear analytical redundancy (RNLAR) technique is presented to detect and isolate actuator and sensor faults in a mobile robot. Both model-plant-mismatch (MPM) and process disturbance are considered during fault detection. The RNLAR is used to design primary residual vectors (PRV), which are highly sensitive to the faults and less sensitive to MPM and process disturbance, for sensor and actuator fault detection. The PRVs are then transformed into a set of structured residual vectors (SRV) for fault isolation. Experimental results on a Pioneer 3-DX mobile robot are presented to justify the effectiveness of the RNLAR scheme.
Fault Diagnosis of Nonlinear Systems Based on Hybrid PSOSA Optimization Algorithm
Ling-Lai Li, Dong-Hua Zhou, Ling Wang
2007, vol. 4, no. 2, pp. 183-188, doi: 10.1007/s11633-007-0183-4
Fault diagnosis of nonlinear systems is of great importance in theory and practice, and the parameter estimation method is an effective strategy. Based on the framework of moving horizon estimation, fault parameters are identified by a proposed intelligent optimization algorithm called PSOSA, which could avoid premature convergence of standard particle swarm optimization (PSO) by introducing the probabilistic jumping property of simulated annealing (SA). Simulations on a three-tank system show the effectiveness of this optimization based fault diagnosis strategy.
A Model-free Approach to Fault Detection of Continuous-time Systems Based on Time Domain Data
Ping Zhang, Steven X. Ding
2007, vol. 4, no. 2, pp. 189-194, doi: 10.1007/s11633-007-0189-y
In this paper, a model-free approach is presented to design an observer-based fault detection system of linear continuoustime systems based on input and output data in the time domain. The core of the approach is to directly identify parameters of the observer-based residual generator based on a numerically reliable data equation obtained by filtering and sampling the input and output signals.
Model Predictive Control of Nonlinear Systems: Stability Region and Feasible Initial Control
Xiao-Bing Hu, Wen-Hua Chen
2007, vol. 4, no. 2, pp. 195-202, doi: 10.1007/s11633-007-0195-0
This paper proposes a new method for model predictive control (MPC) of nonlinear systems to calculate stability region and feasible initial control profile/sequence, which are important to the implementations of MPC. Different from many existing methods, this paper distinguishes stability region from conservative terminal region. With global linearization, linear differential inclusion (LDI) and linear matrix inequality (LMI) techniques, a nonlinear system is transformed into a convex set of linear systems, and then the vertices of the set are used off-line to design the controller, to estimate stability region, and also to determine a feasible initial control profile/sequence. The advantages of the proposed method are demonstrated by simulation study.
Analysis of Absolute Stability for Time-delay Teleoperation Systems
Qi-Wen Deng, Qing Wei, Ze-Xiang Li
2007, vol. 4, no. 2, pp. 203-207, doi: 10.1007/s11633-007-0203-4
In this paper, a new bilateral control algorithm based on absolute stability theory is put forward, which aims at the time-delay teleoperation system with force feedback from the slave directly. In the new control algorithm, the delay-dependent stability, instead of delay-independent stability, is taken as the aim of control design. It improves the transparency of the system at the price of unnecessary stability. With this algorithm, the time-delay teleoperation systems have good transparency and stability. A simulation system is established to verify the effect of this algorithm.
A New Pre-alignment Approach Based on Four-Quadrant-Photo-Detector for IC Mask
Yun Liu, De Xu, Min Tan
2007, vol. 4, no. 2, pp. 208-216, doi: 10.1007/s11633-007-0208-z
In this paper, a new pre-alignment approach based on Four-Quadrant-Photo-Detector (FQPD) for IC mask is presented. The voltage outputs from FQPDs are the functions of alignment marks position offsets with respect to FQPDs. The functions are obtained with least squares error (LSE)-based polynomial fitting after the normalization of experimental data. As the acquired functions are not monotonic about their variables, the alignment marks position offset cannot be given by direct inverse operation on the obtained functions. However, the piecewise polynomial fitting gives the inverse function, with which the alignment marks position offset can be predicted according to the voltage outputs of FQPDs. On the basis of prediction, a pre-alignment control strategy is proposed. The feasibility and robustness of the pre-alignment approach is shown by experiments. Furthermore, the results demonstrate that the maximum error of masks position offset in the X- and Y- directions is less than 15m after coarse pre-alignment.