Volume 3, Number 3, 2006

Special Issue on The Research Conducted in Robotics and Intelligent Machines (pp.215-290)

Display Method:
Regular Paper
Output Feedback Control for a Class of Nonlinear Systems
Keylan Alimhan, Hiroshi Inaba
2006, vol. 3, no. 3, pp. 215-221, doi: 10.1007/s11633-006-0215-5
This paper studies the global stabilization problem by an output controller for a family of uncertain nonlinear systems satisfying some relaxed triangular-type conditions and with dynamics which may not be exactly known. Using a feedback domination design method, we explicitly construct a dynamic output compensator which globally stabilizes such an uncertain nonlinear system. The usefulness of our result is illustrated with an example.
Limiting Behaviour in Parameter Optimal Iterative Learning Control
David H. Owens, Maria Tomas-Rodriguez, Jari J. Hatönen
2006, vol. 3, no. 3, pp. 222-228, doi: 10.1007/s11633-006-0222-6
This paper analyses the concept of a Limit Set in Parameter Optimal Iterative Learning Control (ILC). We investigate the existence of stable and unstable parts of Limit Set and demonstrates that they will often exist in practice. This is illustrated via a 2-dimensional example where the convergence of the learning algorithm is analyzed from the error's dynamic behaviour. These ideas are extended to the AT-dimensional cases by analogy and example.
Framework of Combined Adaptive and Non-adaptive Attitude Control System for a Helicopter Experimental System
Akira Inoue, Ming-Cong Deng
2006, vol. 3, no. 3, pp. 229-234, doi: 10.1007/s11633-006-0229-z
This paper presents a framework of a combined adaptive and non-adaptive attitude control system for a helicopter experimental system. The design method is based on a combination of adaptive nonlinear control and non-adaptive nonlinear control. With regard to detailed attitude control system design, two schemes are shown for different application cases.
Modeling and Control of Hybrid Machine Systems - a Five-bar Mechanism Case
2006, vol. 3, no. 3, pp. 235-243, doi: 10.1007/s11633-006-0235-1
A hybrid machine (HM) as a typical mechatronic device, is a useful tool to generate smooth motion, and combines the motions of a large constant speed motor with a small servo motor by means of a mechnical linkage mechanism, in order to provide a powerful programmable drive system. To achieve design objectives, a control system is required. To design a better control system and analyze the performance of an HM, a dynamic model is necessary. This paper first develops a dynamic model of an HM with a five-bar mechanism using a Lagrangian formulation. Then, several important properties which are very useful in system analysis, and control system design, are presented. Based on the developed dynamic model, two control approaches, computed torque, and combined computed torque and slide mode control, are adopted to control the HM system. Simulation results demonstrate the control performance and limitations of each control approach.
Soil Parameter Identification for Wheel-terrain Interaction Dynamics and Traversability Prediction
Suksun Hutangkabodee, Yahya Hashem Zweiri, Lakmal Dasarath Seneviratne, Kaspar Althoefer
2006, vol. 3, no. 3, pp. 244-251, doi: 10.1007/s11633-006-0244-0
This paper presents a novel technique for identifying soil parameters for a wheeled vehicle traversing unknown terrain. The identified soil parameters are required for predicting vehicle drawbar pull and wheel drive torque, which in turn can be used for traversability prediction, traction control, and performance optimization of a wheeled vehicle on unknown terrain. The proposed technique is based on the Newton Raphson method. An approximated form of a wheel-soil interaction model based on Composite Simpson's Rule is employed for this purpose. The key soil parameters to be identified are internal friction angle, shear deformation modulus, and lumped pressure-sinkage coefficient. The fourth parameter, cohesion, is not too relevant to vehicle drawbar pull, and is assigned an average value during the identification process. Identified parameters are compared with known values, and shown to be in agreement. The identification method is relatively fast and robust. The identified soil parameters can effectively be used to predict drawbar pull and wheel drive torque with good accuracy. The use of identified soil parameters to design a traversability criterion for wheeled vehicles traversing unknown terrain is presented.
Real-time Design Constraints in Implementing Active Vibration Control Algorithms
Mohammed Alamgir Hossain, Mohammad Osman Tokhi
2006, vol. 3, no. 3, pp. 252-262, doi: 10.1007/s11633-006-0252-0
Although computer architectures incorporate fast processing hardware resources, high performance real-time implementation of a complex control algorithm requires an efficient design and software coding of the algorithm so as to exploit special features of the hardware and avoid associated architecture shortcomings. This paper presents an investigation into the analysis and design mechanisms that will lead to reduction in the execution time in implementing real-time control algorithms. The proposed mechanisms are exemplified by means of one algorithm, which demonstrates their applicability to real-time applications. An active vibration control (AVC) algorithm for a flexible beam system simulated using the finite difference (FD) method is considered to demonstrate the effectiveness of the proposed methods. A comparative performance evaluation of the proposed design mechanisms is presented and discussed through a set of experiments.
Dynamics and Stability of Blind Grasping of a 3-Dimensional Object under Non-holonomic Constraints
Suguru Arimoto, Morio Yoshida, Ji-Hun Bae
2006, vol. 3, no. 3, pp. 263-270, doi: 10.1007/s11633-006-0263-x
A mathematical model expressing the motion of a pair of multi-DOF robot fingers with hemi-spherical ends, grasping a 3-D rigid object with parallel flat surfaces, is derived, together with non-holonomic constraints. By referring to the fact that humans grasp an object in the form of precision prehension, dynamically and stably by opposable forces, between the thumb and another finger (index or middle finger), a simple control signal constructed from finger-thumb opposition is proposed, and shown to realize stable grasping in a dynamic sense without using object information or external sensing (this is called blind grasp in this paper). The stability of grasping with force/torque balance under non-holonomic constraints is analyzed on the basis of a new concept named stability on a manifold. Preliminary simulation results are shown to verify the validity of the theoretical results.
Joint Motion Control of a Powered Lower Limb Orthosis for Rehabilitation
Nelson Costa, Milan Bezdicek, Michael Brown, John O. Gray, Darwin G. Caldwell, Stephen Hutchins
2006, vol. 3, no. 3, pp. 271-281, doi: 10.1007/s11633-006-0271-x
Many patients with spinal injures are confined to wheelchairs, leading to a sedentary lifestyle with secondary pathologies and increased dependence on a carer. Increasing evidence has shown that locomotor training reduces the incidence of these secondary pathologies, but the physical effort involved in this training is such that there is poor compliance. This paper reports on the design and control of a new human friendly orthosis (exoskeleton), powered by high power pneumatic Muscle Actuators (pMAs). The combination of a highly compliant actuation system, with an intelligent embedded control mechanism which senses hip, knee, and ankle positions, velocity, acceleration and force, produces powerful yet inherently safe operation for paraplegic patients. This paper analyzes the motion of ankle, knee, and hip joints under zero loading, and loads which simulate human limb mass, showing that the use of soft actuators can provide a smooth user friendly motion. The application of this technology will greatly improve the rehabilitative protocols for paraplegic patients.
Extraction of Robot Primitive Control Rules from Natural Language Instructions
Guang-Hong Wang, Ping Jiang, Zu-Ren Feng
2006, vol. 3, no. 3, pp. 282-290, doi: 10.1007/s11633-006-0282-7
A support vector rule based method is investigated for the construction of motion controllers via natural language training. It is a two-phase process including motion control information collection from natural language instructions, and motion information condensation with the aid of support vector machine (SVM) theory. Self-organizing fuzzy neural networks are utilized for the collection of control rules, from which support vector rules are extracted to form a final controller to achieve any given control accuracy. In this way, the number of control rules is reduced, and the structure of the controller tidied, making a controller constructed using natural language training more appropriate in practice, and providing a fundamental rule base for high-level robot behavior control. Simulations and experiments on a wheeled robot are carried out to illustrate the effectiveness of the method.
Adaptive Linear Filtering Design with Minimum Symbol Error Probability Criterion
2006, vol. 3, no. 3, pp. 291-303, doi: 10.1007/s11633-006-0291-6
Adaptive digital filtering has traditionally been developed based on the minimum mean square error (MMSE) criterion and has found ever-increasing applications in communications. This paper presents an alternative adaptive filtering design based on the minimum symbol error rate (MSER) criterion for communication applications. It is shown that the MSER filtering is smarter, as it exploits the non-Gaussian distribution of filter output effectively. Consequently, it provides significant performance gain in terms of smaller symbol error over the MMSE approach. Adopting Parzen window or kernel density estimation for a probability density function, a block-data gradient adaptive MSER algorithm is derived. A stochastic gradient adaptive MSER algorithm, referred to as the least symbol error rate, is further developed for sample-by-sample adaptive implementation of the MSER filtering. Two applications, involving single-user channel equalization and beamforming assisted receiver, are included to demonstrate the effectiveness and generality of the proposed adaptive MSER filtering approach.
Enhanced LMI Representations for H2 Performance of Polytopic Uncertain Systems: Continuous-time Case
Ai-Guo Wu, Guang-Ren Duan
2006, vol. 3, no. 3, pp. 304-308, doi: 10.1007/s11633-006-0304-5
Based on two recent results, several new criteria of H2 performance for continuous-time linear systems are established by introducing two slack matrices. When used hi robust analysis of systems with polytopic uncertainties, they can reduce conservatism inherent in the earlier quadratic method and the established parameter-dependent Lyapunov function approach. Two numerical examples are included to illustrate the feasibility and advantage of the proposed representations.
Robust and Active Fault-tolerant Control for a Class of Nonlinear Uncertain Systems
You-Qing Wang, Dong-Hua Zhou, Li-Heng Liu
2006, vol. 3, no. 3, pp. 309-313, doi: 10.1007/s11633-006-0309-0
A novel integrated design strategy for robust fault diagnosis and fault-tolerant control (FTC) of a class of nonlinear uncertain systems is proposed. The uncertainties considered in this paper are more general than those in other existing works, and faults are described in a new formulation. It is proven that the states of a closed-loop system converge asymptotically to zero even if there are uncertainties and faults in a system. Simulation results on a simple pendulum are presented for illustration.
Kolmogorov-Chaitin Complexity of Digital Controller Implementations
James F. Whidborne, John McKernan, Da-Wei Gu
2006, vol. 3, no. 3, pp. 314-322, doi: 10.1007/s11633-006-0314-3
The complexity of linear, fixed-point arithmetic digital controllers is investigated from a Kolmogorov-Chaitin perspective. Based on the idea of Kolmogorov-Chaitin complexity, practical measures of complexity are developed for state-space realizations, parallel and cascade realizations, and for a newly proposed generalized implicit state-space realization. The complexity of solutions to a restricted complexity controller benchmark problem is investigated using this measure. The results show that from a Kolmogorov-Chaitin viewpoint, higher-order controllers with a shorter word-length may have lower complexity and better performance, than lower-order controllers with longer word-length.